Not all that happy with where i had to bring it vertical...but it's ok for now...i made sure to mount and route everything so it could be replaced with larger diameter pipe later....later it will come out of the fender and run up the driver side of the windshield like a regular snorkel
The brackets are custom bent L-brackets with some sheet metal screws holding the snorkel to them and some self taping metal screws holding the brackets to the truck...i put a dap of clear silicon over the screw heads and in between the brackets and the snorkel to keep out any water
The intake part is some sort of electrical entrance connector for bringing electrical wires into a house from the pwer company....it was like $12 at Home Depot...it came in grey only, so picked up a can of Krylon spray paint for plastic